ECS K7SEM Motherboard/USB port question...

Same problem.

So far:

http://www.geek.com/news/geeknews/2001aug/bch20010823007470.htm

Re: USB Support?? (11:19am EST Thu May 30 2002)

Going to answer my own question here, in case some one else needs the info, and because I'm such a nice guy...

(Pins1,2) +5V

(Pins 3,4) -D

(Pins 5,6) +D

(Pins 7, 8) Ground - by jpd030868

http://www.amptron.com/html/extendedusbmodule.html#LAYOUT4

K7SEM Pin Layout 4

1 Vcc +5v (RED) 2 Ground (BLACK)

3 4 (+) Data (GREEN)

5 (-) Data WHITE 6 (-) Data WHITE

7 (+) Data (GREEN) 8

9 Ground (BLACK) 10 Vcc +5v (RED)

if somebody got reliable information pls. send to webstranger at mail.ru

Thanks!

Same Motherboard and same problem, anybody found a solution?

Thank

Hi- please go to: http://www.ecsusa.com/usbk7sem.cfm as deserado suggested- it tells you which is pin 1 for USB2 and USB3. I think this page may point out a mistake in the manual and/or the printed pin1 on the PCB.

David

I also have the same motherboard and the same problem with the USB port 2 and 3. have u found any solution?

Thanks

It's not a bug. Please go to the following link and you will find out.

http://www.ecsusa.com/usbk7sem.cfm

Have you tried upgrading to the latest BIOS for the ECS K7SEM? Perhaps that was a bug and has been fixed in a later BIOS revision.

I have an ECS K7SEM motherboard....it has 2 rear mounted usb ports that work fine...it also has 2 others which are supposed to be available on the board...the problem is that when I hook these up....it affects the others...they won't detect hardware...etc....my expansion ports have individual plugs as I was told different boards have different plug in configurations and wanted to be sure that i could plug in properly... If anyone can help please drop me a note????!!!!